How to Calculate the 2020/2021 Academic Session YABATECH Aggregate Score: It is very easy to calculate the YABATECH aggregate ranking, as the Polytechnic uses a formula close to that of most polytechnics.
Yaba College of Technology-YABATECH uses a system, like other Federal Polytechnics, where the Jamb score is divided by 400 and multiplied by 50.
yabatech departmental cut off mark 20202021, yabatech resumption date 20202021, is yabatech aggregate score out, how to calculate yabatech departmental cutoff mark, yabatech post utme 2020, yabatech post utme score, yabatech form, yabatech resumption date 20192020
It is not news that YABATECH does not write Post UTME tests, but candidate qualifications are screened, which is why most applicants are often curious about how YABATECH measures their aggregate score after seeing their Jamb results.
Students need this form of measurement a lot so that they know how hard they need to study OR to know whether they will be accepted to the institution of their choice or whether their course or institution should be modified.
If you find yourself in every category, then you are always on the right track. This post will give you a first-hand example of the grading system of Yaba College of Technology, plus the criteria and variables placed in place when calculating the aggregate score or cut off point of YABATECH.
We would like to ask if you understand what an aggregate score is all about before we go into detail about how to calculate the YABATECH aggregate score for the 2020/2021 session. Making this post easier to understand will be to describe what an aggregate cut off mark or score is. As far as any of you understand this we can comfortably boast of a quantum that does not understand what an aggregate score is and why it is being weighed.
The total score a candidate has after dividing the JAMB score by the appropriate figure and multiplying it by 50, which will be seen below when reading this article, is an aggregate cut off mark in our tertiary institution sense. You’d have to combine more than just the JAMB aggregate for certain colleges and polytechnics, but also the O’Level grades.
It is really important to know how YABATECH calculates their aggregate ranking, as this will decide whether or not you are qualified for admission to the Polytechnic. Before you are allowed to research any of your desired courses offered at YABATECH, your aggregate score should reach the departmental cut-off mark of the course you want to study.
How to Calculate the aggregate YABATECH score
After Jamb’s conclusion and reported data, the aggregate score comes into effect. Today, for the 2020/2021 academic session, we are going to bring you through how to measure the Yaba College of Technology aggregate score or aggregate cut off point.
If you can do very well in your Jamb, however, and you will find yourself getting a very high aggregate score with a really good O level performance which means candidates with good aggregate scores have good chances of studying their dream course.
You need to know your JAMB score in order to determine the YABATECH aggregate score. You can go ahead and use the calculation process below once you have the information available.
How JAMB Aggregate Calculates YABATECH
Only break your JAMB score by 400 and multiply it by 50. Let’s say that an applicant applying for YABATECH analysis has a JAMB score of 201, divides 201 by 400, and multiplies it by 50.
[201/400] x 50 which gives 25.125
Proceed to the next phase after you have measured your JAMB aggregate.
You may also use the YABATECH O’level grading structure to determine the O’level aggregate.
YABATECH O’level System of Grading
The grading system YABATECH uses is shown below.
A1 = 8.0 Marks.
B2 = 7.20 Marks.
B3 = 6.40 Marks.
C4 = 5.60 Marks.
C5 = 4.80 Marks.
C6 = 4.0 Marks.
Write down the score somewhere after you have measured your cumulative O’level aggregate.
YABATECH gives 10 marks to candidates who apply for one sitting (O’level outcome), while 5 marks are granted to candidates who combine two O’level outcomes.
Now that you have earned the three aggregate scores listed earlier, your Jamb aggregate, O level grading system, and Bonus marks are respectively added together, giving the result of your screening.
Your final outcome becomes your YABATECH post-UTME screening score/aggregate score after all of these.
Why is the measurement of the YABATECH aggregate score important?
It is necessary to know how to measure the aggregate score of YABATECH, as this will decide whether you are qualified for admission or not. This is because you can equate your aggregate score with the departmental cut-off mark of the course you want to review.
You will not be eligible for admission to Yaba College of Technology-YABATECH or pushed to other departments with lower cut off marks if you are unable to reach your departmental cut off mark, so we typically advise students to make a change of direction.
You will have to hit or exceed the departmental cut-off mark in order to make sure you are accepted to research the course of your preference. It is suggested, however, that you exceed the departmental cut-off point, especially if you are going for a competitive course.
Departmental YABATECH Cut Off Mark for 2020/2021 Session
For each of its departments, the management of the Yaba College of Technology issues a cut-off mark that any student must reach before being eligible for admission. On an annual basis, the departmental cut-off mark is published and some changes are also made. For the preceding year, however, you could use the departmental cut-off mark to schedule yourself for the JAMB.
Make sure your aim is to perform exceptionally so that the overall score is well above the cut-off point of the course you want to take.
YABATECH JAMB Label Cut Off
JAMB publishes an official cut-off mark to which all polytechnics must adhere. However, for various courses, certain colleges have a distinct cut-off point. This is based on the course’s competitiveness and difficulty. Although the minimum JAMB cut-off point for YABATECH is 150, you would like to score higher to make sure you end up with a good aggregate score.
For your chosen course, scoring below the accepted YABATECH cut off mark does not mean you will not be qualified for admission as long as you do not score below 150. Scoring something below the defined cut-off marks, however, indicates that you would have to score incredibly high in your Jamb to ensure that you end up with a good aggregate score that will hit the department’s cut-off point.
Which concludes the article on how to measure for the 2020/2021 academic session the YABATECH aggregate score. The information above will help you with all you need to get admitted to study the course of your choice at Yaba College Of Technology.
Questions on how the aggregate of Yaba College of Technology calculates its aggregate score should be addressed to us through the comment section below and we will respond accordingly. Do not forget to disseminate this information for others to profit from through Facebook, Twitter, and other social media platforms at your disposal.